Types Of Nuts And Bolts

 



What are Nuts?

A nut is a type of fastener that is made up of a block with a threaded hole in the centre. The hole has ‘female’ threads that match the male threads of a bolt or screw. 

To hold materials together, nuts are utilised in conjunction with their mating bolt or screw. Ananka Fasteners is the leading high-quality Nuts Manufacturer and Supplier in India. 

The hexagonal form is the most frequent for a nut because six sides allow more angles for a tool to approach from, albeit the corners are more sensitive to getting rounded off over time, making them less convenient to use with tools. Square nuts, which are less frequent, can also be utilised.

Types of Nuts

There are many different types of nuts because they are used for so many different applications. Among them are the following:

  • Hex Nuts: Hex Nuts are six sided general purpose nuts with internal screw threads. Hex nuts are one of the most common hexagonal fasteners with internal threads that screw on to the shank of a hex head cap screw or other bolts. Hex jam nuts, heavy hex nuts, and lock nuts are just a few types of hex nuts we carry.
  • Hex Coupling Nuts: Hex Coupling Nuts, also known as extension nuts, are elongated internally threaded nuts used to join two male threads. Coupling nuts are often used for joining threaded rods or hanger bolts in a variety of applications that require extending threaded rod or attaching like items.
  • Hex Flange Nuts: Hex Flange Nuts are hex nuts with a wide flange portion near one end that acts as an integrated non-spinning washer. Flange nuts are used to spread the load placed on the nut over a wider surface area to prevent damage to the installation material.
  • 12 Point Flange Nuts: 12 Point Flange Nuts are commonly used to speed up assembly operations or in areas where their larger bearing surface can cover oversized holes or slots The additional bearing surface also serves to distribute the pressure of the nut over the part being secured, reducing the chance of damage or to loosen.
  • Weld Square Nuts: A Weld Square Nuts is a special type of nut specifically designed to be welded to another object (spot welding).
  • K Lock Nuts: Keps Nuts, or K Lock Nuts, are hex nuts pre-assembled with a free spinning external tooth lock washer. The locking action is achieved when the nut is tightened against a bearing surface as the teeth of the washer dig into it.

What is a Bolt?

A bolt is a threaded shaft mechanical fastening. Bolts and screws, both mechanical fasteners having threaded shafts, are closely linked. These fasteners are usually put through two pieces having holes that are aligned. The High Tensile Bolt is a bolt with high tensile strength. M8 High Tensile Bolts have an 8mm diameter and come in a variety of lengths and material grades. The M10 High Tensile Bolts are threaded on both ends and are made of metal.

Types of bolts

  • Hex Bolt: Hex Bolt have hexagonal heads and machine threads for use with a nut or in a tapped hole. Also known as hex cap screws or machine bolts.
  • Elevator Bolts: Originally designed for attaching elevator buckets to conveyor belts, Elevator Bolts are similar to carriage bolts, except the head is thin and flat. Elevator Bolts have a square neck that resists turning when the nut is tightened or removed.
  • Eye Bolts: Eye Bolts can be used as a connection point for rigging, anchoring, pulling, pushing, or hoisting applications. Although eye bolts are commonly used in industrial applications, they're also commonly misunderstood or used incorrectly

The High Tensile Bolt is a bolt with high tensile strength. The composition of a material can vary depending on its grade. Because of their high tensile strength, the majority of these are chromium nickel and nickel-copper alloys. Some definitions say that whether something is a bolt or a screw depends on how it is used. A bolt is threaded through all of the pieces, and a nut is fitted onto the bolt to provide clamping force and restrict axial movement.

Ananka Group is also a major Bolt Manufacturer,Nuts Manufacturer, Screw Manufacturer, Washers Manufacturer and Stud Bolt Manufacturer in India.

For More Details:

Website: https://anankafasteners.com/

Source: Nuts Manufacturer and Supplier in India

Comments

Post a Comment

Popular posts from this blog

From Rust to Trust: The Strength of Stainless Steel Fasteners

Image
  Ananka Group  is the high-quality  SS Fasteners Manufacturers in India . In the fast-paced world of engineering and construction, combating rust has long been a challenge. Traditional fasteners composed of corrosion-prone materials typically resulted in weakening structures and higher maintenance expenses. However, the introduction of stainless steel fasteners has marked a new age, shifting the focus away from rust worries and toward confidence in the endurance and strength of these exceptional components. In this article, we will look at how we went from dealing with corrosion to having complete confidence in stainless steel fasteners. The Rust Conundrum: Rust, the nemesis of many materials, has plagued industries relying on fasteners for decades. The corrosive impact of moisture, harsh weather conditions, and exposure to various chemicals can compromise the structural integrity of fasteners, posing significant safety risks and escalating maintenance expenses. Additionally, we are e
Read more

Fundamentals of Fasteners: Recognizing Types and Uses

Image
  Ananka Group  is among the best  Fasteners Manufacturer in India . Fasteners are a vital component used in construction, manufacturing, and many other industries. They hold structures and parts together. Since there are many different kinds of fasteners that are available, each intended for a particular use, it is essential to comprehend their principles in order to guarantee the structural integrity and safety of buildings. We will examine the fundamentals of fasteners in this blog, including their varieties and uses. Types of Fasteners: Screws: Wood Screws: With a coarse thread and a sharp point for effortless penetration, these  screws  are made specifically for use in wood applications. Machine Screws: Available in a range of sizes and materials, machine screws are usually used with  nuts  or tapped holes. Self-Tapping Screws: These screws don't require pre-drilling because they have a sharp point and form their own threads as they penetrate the material. Bolts: Hex bolts: Ea
Read more

The Art of Welding Stainless Steel Threaded Rods: Tips and Tricks

Image
  Stainless steel threaded rods are one of the most versatile and durable materials used in a wide range of applications, from construction to DIY projects. To ensure their long-lasting durability, welding is a crucial process that requires a high level of expertise and precision. In this article, we will explore the art of welding stainless steel threaded rods and provide some tips and tricks to help you achieve professional-grade results. Threaded rods are available in a variety of sizes and grades; the most common are 12mm stainless steel rods , M16 threaded rods , stainless steel threaded rods , and 12mm threaded rods .  Choose the Right Welding Technique Welding stainless steel threaded rods requires a different approach compared to other metals, as stainless steel is prone to warping, cracking, and distortion during the welding process. Therefore, it's essential to choose the right welding technique to minimise these issues and ensure a strong and long-lasting weld. TIG (Tun
Read more