Ananka Fasteners

  Inconel 625: Inconel 625 is a high-strength nickel-chromium-molybdenum alloy with excellent strength, temperature tolerance, and corrosion resistance.  Inconel 625 bolts  are primarily used in cyclic cooling and heating applications. When it comes to electric resistance welding, they come in handy. The bolts are used in the engine casing, honeycomb structures, and hydraulic lines. Ananka Fasteners is a leading supplier and  manufacturer of Inconel Fasteners  in various types and sizes. Pitting and crevice corrosion are not issues with this material. Inconel 625 Fasteners  a r e measured according to DIN, ASTM, BS, and other international standards. M3 to M56 are available, as well as 3/6 inch to 2 inch and custom sizes. Depending on the application, the lengths vary from 3mm to 200mm.  Bolts  and  nuts  made of Alloy 625 Fasteners are available in a range of shapes and sizes for different applications. Inconel 625 Properties: Chemical Composition Ni: 58–71% , Cr: 21–23%, Mo: 8–10 %,

  High Tensile Bolts: High tensile bolts  have a higher tensile strength than normal bolts, making them much more common an d  useful in a variety of applications. A blackish-colored alloy is used in many high-tensile bolts and fasteners on the market. The  High Tensile Bolt  is a bolt with high tensile strength. The composition of a material can vary depending on its grade. Because of their high tensile strength, the majority of these are chromium nickel and nickel-copper alloys.  M8 High Tensile Bolts  have an 8mm diameter and come in a variety of lengths and material grades. The bolts are threaded on the outside, while the nuts are threaded on the inside. The male threads on the bolts match the female threads on the nuts. The  M10 High Tensile Bolts  are threaded on both ends and are made of metal. There are many grades available, including  10.9, 8.8, DIN 933, and 12.9 grades . Many other standards exist, including IS1364, IS1363, DIN EN ISO 4014, and others. These standards specif